Printing at CCI Commons -- Windows

Windows 11 Instructions

  1. Go to Settings and navigate to Bluetooth & devices then Printers & scanners

  2. Click "Add device" then wait until it shows "The printer that I want isn't listed" and click "Add manually"
    Windows 11 CCI Printer Step 1

  3. Click "Add printer using a  TCP/IP address or hostname" then click next
    Windows 11 CCI Printer Step 2

  4. Enter "ccicommonsprint.cci.drexel.edu" or "ccicommonsprint2.cci.drexel.edu" as the hostname then click next
    Windows 11 CCI Printer Step 3

  5. Make sure Standard and "Generic Network Card" is selected then click next
    Windows 11 CCI Printer Step 4 

  6. Select "HP" under Manufacturer (on left side) and "HP LaserJet 600 M601 M602 M603 PCL6" under Printers
    a. If either are not there, you can do one of two options.
    1. Do "Windows Update" in the bottom right, which will take a few minutes.
    2. Download and install the Windows 11 driver from https://support.hp.com/us-en/drivers/hp-laserjet-enterprise-m606-series/7087300. Click "Have Disk..." and select the driver executable file.
    Windows 11 CCI Printer Step 5

  7. Select "HP" under Manufacturer (on left side) and "HP LaserJet 600 M601 M602 M603 PCL6" under Printers then click next
    Windows 11 CCI Printer Step 6

  8. Name the printer and click next
    Windows 11 CCI Printer Step 7

  9. Make sure that "Do not share this printer" is selected and click next
    Windows 11 CCI Printer Step 8

  10. It is recommended that you click "Print a test page" to ensure that the printer is connected properly
    Windows 11 CCI Printer Step 9

You are all set for Windows printing!


Troubleshooting